Sensor type Fiber Bragg Grating Wind Measurement Mast
1,Product introduction
Pay attention to the use of ergo1665 glue, the whole process from glueing to pasting should not exceed 3 minutes, otherwise the ergo glue will solidify. At the same time, the internal surface temperature of the blade is between 10 and 40 °C.
2,Features
① Simple installation and easy maintenance
② High precision
③ Flexible and portable
④ Data is safe and reliable
3,Application field
① Blade root load measurement
② Independent pitch
③ Blade derating
④ Fatigue monitoring
⑤ Fan control
4,Performance Parameter
Demodulator performance parameters
| IP protection class | IP20 |
| Maximum working altitude | 3000m |
| Operating temperature | -20～60℃ |
| Storage temperature | -40～80℃ |
| Environment humidity | -180°～180° |
| Wind speed accuracy | 5%～9RH5% |
| Powered by | 22-26VDC |
| Power consumption | <15W |
Sensor performance parameters
| IP protection class | IP67 |
| Maximum working altitude | 3000m |
| Operating temperature | -40～50℃ |
| Storage temperature | -40～80℃ |
| Environment humidity | 0～95%RH |
| Sensor type | Fiber Bragg Grating |
| Measuring range | ±1500με |
| Grating reflectivity | -0.5g～0.5g |
| IP protection level | 50%~90% |
5,External interface of demodulator
LAN: network interface, which can be used for the connection of the device network; the network cable can be connected to the computer, and the device parameter setting, status observation and data transmission can be performed through the device client software.
CANopen: CAN interface, which transmits data externally through the CANopen protocol.
POWER: Power interface, which supplies power to the whole device.
1-16: Sensor interface, used to connect with different fiber grating sensors (the number of channels is customized according to customer requirements).
FIELDBUS: DB9 interface, supports external data transmission through Profibus, RS485, etc.
Product Tags:
|
|
Sensor Type Fiber Bragg Grating Wind Measurement Mast OEM ODM Images
|
